Tel:+86-15264102980    Whatsapp: 8615264102980

News

The causes and treatment methods of the sound inside the Food pellet machinery

The causes and treatment methods of the sound inside the Food pellet machinery

Food pellet machinery within the failure causes of sound has a lot of, which reminds us of above all is the internal appeared sound, may be your operation, could also be much more when we put in law let particles into the body cavity, this kind of phenomenon is common, treatment method is very simple, clear is a power outage, it is also need to be careful, because the click will produce a lot of static electricity in the normal movement, and the electrostatic are dependent on Feed pellet machinery, we must deal with static electricity when operating, open the shell of machine itself, then clearly that this method is simpler, It's also more common.

Food pellet machinery

And feed particles frequently, the mechanical problem is bearing damage, this phenomenon is often caused by excessive operation, and the speed of running too fast can cause this problem, so we suggest that at the time of use must be reasonable use, food pellet machinery malfunction omen is appeared in front of the noise, we will immediately change the bearing, and if it is damaged in bearing fault is very obvious, we can obviously feel pellets machine itself has a lot of shaking or itself has a lot of parts to stop the rotation, bearings have the problems, all of these are.

Later some problems is a kind of food pellet machinery parts there is a problem, or loose, the noise can cause mechanical itself, some loose parts appeared he will not affect our normal work, and there are a lot of screw off noise will appear, but also will not affect our normal work, so there are a lot of problems are neglected by us after damage, so we must even if found loose parts processing, there are a lot of parts there is a problem not only affects our work, even affect our personal safety, so be sure to attach importance to, If we find a screw falling out of the outlet, we should even find the part of the screw falling off and then rescrew it. This is a test of our seriousness in work.

We have a lot of internal problems are invisible, only there is a problem we can slowly find, but there are a lot of problems will cause serious damage, so we have to do regular maintenance and cleaning, must be seriously do this step, we also want to know when to use the food pellet machinery common problem and the method of excluding, it is very helpful to our work.


Go Back 】 | 【 Print

Deutsch Espanol Francais Italiano Portugues Japanese Korean Arabic Russian
X
Scan our wechatClose
our wechat